Castrol EDGE 0W-40 A3/B4 is a fully synthetic, SAE 0W-40, engine oil formulated for prestige and high performance engines. Castrol EDGE 0W-40 A3/B4 provides outstanding wear protection in performance engines designed to run at their optimum level on lower viscosity oils. Castrol EDGE 0W-40 A3/B4 should be used in engines where maximum efficiency and protection is demanded This product is not suitable for vehicles fitted with Diesel Particulate Filters (DPF).
Castrol MAGNATEC 10W-40 is suitable for petrol engines, direct and indirect injection engines, LPG and CNG cars, light commercial vehicles and 4WDs where API SN/CF or earlier specifications are recommended. Meets and exceeds API SN/CF, ACEA A3/B3, A3/B4 requirements
Castrol GTX ULTRACLEAN synthetic engine oil technology has superior performance. Its unique Double Action formula cleans away old sludge, and protects against new sludge formation, giving you more control over today´s challenging conditions. Castrol GTX ULTRACLEAN 15W-40 is suitable for use in automotive petrol, LPG, CNG and diesel engines where the manufacturer recommends an ACEA A3/B3, API SN/CF or earlier specification 15W-40 lubricant.
Full synthetic DexronŽ III type automatic transmission fluid with proven outstanding performance in high temperature and severe duty applications. Particularly suitable for competition use, towing or arduous high temperature service in cars, 4WDs and light commercial vehicles. May be used wherever DexronŽ ,DexronŽ II or DexronŽ III are recommended.
Full synthetic rear axle fluid incorporating Castrol's most advanced transmission fluid technology. Engineered to provide protection at the extremes of high and low operating temperatures, it is our prime recommendation for rear axles used in competition, severe duty and long drain applications. Suitable for both limited and non-limited slip rear axles. SAE 80W-140, API GL5/6.
Mild extreme pressure gear oil with special viscosity stabilisers to overcome shift problems. Recommended for use in transaxles of most front wheel drive vehicles with a transverse engine and manual transmissions experiencing low temperature shift problems. SAE 75W/80, API GL4.
Fully synthetic manual transmission fluid for applications where superior synchroniser performance is required. Also recommended for passenger cars and light commercial vehicle transmissions, transaxles and transfer cases where API GL-3 or GL-4 SAE 75W-85 or SAE 80W is required.
Is suitable for use in all brake fluid systems in cars, and light commercial vehicles requiring either a DOT 3, DOT 4 or Super DOT 4 product (Not suitable for use where a mineral oil based fluid is specified).
Suitable for use in all brake fluid systems in cars, motorcycles and light commercial vehicles requiring either a DOT 3 or DOT 4 product (Not suitable for use where a mineral oil based fluid is specified).
A fully formulated, ethylene glycol based coolant designed to meet the requirements of the majority of cars and light commercial vehicles with petrol and diesel engines. Use at 30 - 50% concentration as recommended by the vehicle manufacturer.
Do NOT mix Castrol coolant with other brands of antifreeze, coolants or corrosion inhibitors because of possible incompatibility of inhibitors. Follow manufacturer's recommendations for coolant concentration.
Capacities shown are approximate only.
Where the manufacturer specifies the capacity as including filter/s, the capacity is marked thus (*).
Unless otherwise indicated (e.g. by a notation), capacities shown are service refill quantities.
In all cases, the dipstick or level plug should be used as a final check.